RELAY system with eight 15A switching channels. Includes AMPSEAL connector, matching loom and Easyfit Transmitter and option to specify carbon fibre button plate.

Fully assembled* with eight relay-switched pushbuttons with a choice of plates and ready to bolt onto your steering wheel boss.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Main Features

8 relay-switched buttons
integrated BeamSTOP hardware requiring no external relays
option to add CAN signalling

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.

*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
8 hole button plate B.pdf
8-channel AMPSEAL 23-pin connector pinout diagram.pdf
FREEWheel-8 installation instructions (15A capability).pdf
FREEWheel Easyfit Transmitter installation instructions.pdf
8 hole button plate X8.pdf
8 hole button plate C8.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf

Included

Easyfit Transmitter, 8 pushbuttons fitted to the chosen plate
Transmitter battery
Motorsport pushbutton decal sheet
8-channel relay-switching Receiver
USB cable
Installation instructions

Optional

23-pin 0.7m loom or 23 pins & housing
Carbon fibre button plate in lieu of acrylic button plate
CAN-enabled Receiver upgrade
120Ohm CAN termination resistor (fitted or loose)

Hardware Features

8 Internal relays rated to 15A at 12V which can be used for high or low-side switching of loads via 8 pushbuttons
Option for CAN output for seamless PDM integration and dash integration
Range of driving and racing output channel modes
Re-configurable using the included FREEWheel USB programming software
AMPSEAL connector(s)
IP67-rated USB port with rubber cap
Flame-retardant ABS plastic
Fully conformal coated for environmental protection
Battery life over 5 years
Unique Transmitter ID prevents cross-talk and interference
Wiring loom 18AWG
Option to upgrade to carbon fibre button plate

Driving Features

Momentary
Latching
BlinkSTOP indicator cancelling
BeamSTOP main beam toggle & flash
Flash-to-Pass
IVA fog light behaviour
Hazards
Wiper Latch & Intermittent
Flash
Rainlight behaviour

Size & Weight

Easyfit Transmitter: bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels
Easyfit Transmitter: 176 x 154 x 19-29mm, 220g including battery
Relay Receiver:121 x 66 x 40mm, 385g including loom

Plate Design

After you place your order, we will contact you and guide you through the plate design process.

We will confirm the buttonswitch colours, any decals you would like applying and how you would like the system pre-configured.

You will receive a photo of your loose-assembled plate for approval or changes and once you are completely happy with the design, we will put it into the queue for final assembly and test.

Availability & Leadtimes

We hold all our components in stock as sub-assemblies and this allows us to build quickly to your exact specification. We ask that you allow 3 working days for loose assembly of your plate and 7-10 working days for final assembly and despatch.

Shipping

See our Delivery Information here https://blinkstop.co.uk/shop/delivery

Warranty & Returns

See our Returns policy here https://blinkstop.co.uk/shop/returns

and our Guarantee policy here https://blinkstop.co.uk/shop/guarantee