Due to ongoing labour actions in Canada, our carrier's shipping operations are suspended. As a result, we are unable to accept orders destined to Canada until we have secured an alternative carrier.

RELAY system kit with eight 15A switching channels. Includes AMPSEAL connector, matching loom and pigtailed Transmitter, for wireless control of your ECUs, PDMs and accessories.

Mount the Transmitter to the rear of your steering wheel button plate* or wherever you want fingertip wireless control, and wire to your switches and paddles.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Main Features

8 relay-switched outputs
integrated BeamSTOP hardware requiring no external relays
option to add CAN signalling

*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
8-channel AMPSEAL 23-pin connector pinout diagram.pdf
FREEWheel RELAY 4 & 8 installation instructions.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf
KCE_WirelessCAN_MaxxECU.zip
FREEWheel 16 Configuration tool.zip
FREEWheel HYBRID 16 installation instructions.pdf

Included

Pigtailed Transmitter
Transmitter battery
8-channel relay-switching Receiver
USB cable
Installation instructions

Optional

23-pin 0.7m loom or 23 pins & housing
CAN-enabled Receiver upgrade
120Ohm CAN termination resistor (fitted or loose)

Hardware Features

8 Internal relays rated to 15A at 12V which can be used for high or low-side switching of loads
Option for CAN output for seamless PDM integration and dash integration
Range of driving and racing output channel modes
Re-configurable using the included FREEWheel USB programming software
AMPSEAL connector(s)
IP67-rated USB port with rubber cap
Flame-retardant ABS plastic
Fully conformal coated for environmental protection
Battery life over 5 years
Unique Transmitter ID prevents cross-talk and interference
Wiring loom 18AWG

Driving Features

Momentary
Latching
BlinkSTOP indicator cancelling
BeamSTOP main beam toggle & flash
Flash-to-Pass
IVA fog light behaviour
Hazards
Wiper Latch & Intermittent
Flash
Rainlight behaviour

Size & Weight

Pigtailed Transmitter: 176 x 154 x 19-29mm, 61g including battery
Relay Receiver:121 x 66 x 40mm, 385g including loom

Availability & Leadtimes

We hold all our components in stock as sub-assemblies and this allows us to build quickly to your exact specification. We ask that you allow 3-5 working days for final assembly and despatch.

Shipping

See our Delivery Information here https://blinkstop.co.uk/shop/delivery

Warranty & Returns

See our Returns policy here https://blinkstop.co.uk/shop/returns

and our Guarantee policy here https://blinkstop.co.uk/shop/guarantee