AMPSEAL gold pin connector, matching loom, internal relays rated to 15A and integrated BeamSTOP hardware requiring no external relays.

FREEWheel-4 relay system with Easyfit Transmitter, ready to bolt onto your steering wheel boss. 

Fully assembled to our button plate with soldered switches*.  Simple to install, the FREEWheel Receiver connects to your existing circuits and is ideally located in an unobtrusive place under your dashboard.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Features of the FREEWheel-4 4-channel relay system and USB configuration software

  • FREEWheel 4-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 
  • Control up to 4 channels with endless re-configuration possibilities, using the included FREEWheel USB programming software.
  • Includes internal relays rated to 15A at 12V and can be used for high- or low-side switching of loads.
  • Choose any combination of smart headlight, smart indicator and IVA fog light modes or momentary and latching behaviour for each channel.
  • The FREEWheel-4 Relay Receiver measures 121 x 66 x 40mm and weighs 300g and that includes our matching, custom loom and gold pin connector.
  • At just 176 x 154 x 19-29mm, the fully assembled FREEWheel Transmitter and button plate weigh just 200g including the battery!
  • What's in the box?   Easyfit Transmitter assembled to button plate with 4 soldered pushbuttons and covers, battery, our custom top quality decal sheet, 4-channel Receiver with AMPSEAL connector with 14 gold pins, matching loom, USB cable, FREEWheel sticker, installation instructions.

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.

FREEWheel wireless steering wheel button control system.  For pushbuttons and paddleshifters.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
4 hole button plate A.pdf
4-channel AMPSEAL 14-pin connector pinout diagram.pdf
FREEWheel-4 installation instructions (15A capability).pdf
FREEWheel Easyfit Transmitter installation instructions.pdf
4 hole button plate G.pdf

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel 4-Channel Easyfit RELAY System

  • Product Code: FW04_R_Ez_L
  • Availability: 4
  • £442.00

  • Ex UK VAT / International: £368.33

Available Options


Related Products

Acrylic Button Plate A and Disk

Acrylic Button Plate A and Disk

A custom shaped, acrylic, 3mm thick button plate and 3mm or 5mm thick disk.Button plate fits all sta..

£35.10 Ex UK VAT / International: £29.25

FREEWheel 8-Channel Easyfit RELAY System

FREEWheel 8-Channel Easyfit RELAY System

AMPSEAL gold pin connector, matching loom, internal relays rated to 15A and integrated BeamSTOP hard..

£532.00 Ex UK VAT / International: £443.33

14-PIN FREEWheel-4 Loom Housing and Pins

14-PIN FREEWheel-4 Loom Housing and Pins

AMPSEAL connector and gold pins for adding to your own loom, to connect to your 4-channel FREEWheel ..

£22.10 Ex UK VAT / International: £18.42

Acrylic Button Plate G and Disk

Acrylic Button Plate G and Disk

A custom shaped, acrylic, 3mm thick button plate and 3mm or 5mm thick disk.Button plate fits all sta..

£35.10 Ex UK VAT / International: £29.25

FREEWheel RACE 8-Channel SOLID-STATE Easyfit System

FREEWheel RACE 8-Channel SOLID-STATE Easyfit System

SOLID-STATE RACE system with AMPSEAL gold pin connector, matching loom and Easyfit Transmitter, read..

£532.00 Ex UK VAT / International: £443.33

Tags: FREEWheel, relay, 8-channel, wireless controls, Easyfit