SOLID-STATE with CANbus RACE system with two analogue 0-5V channels.  Includes AMPSEAL connector, matching loom and Easyfit Transmitter and option to spec carbon fibre button plate. 

Fully assembled* with six solid state-switched pushbuttons, two of our MIL-spec cal switches with red anodised knobs and two paddleshift switches with carbon fibre levers.  Uses the larger X62 plate, seen here on a 350mm wheel, and ready to bolt onto your steering wheel boss. 

A revolution in wireless steering wheel controls, for kit cars and race cars.

Features of the FREEWheel RACE GTX62 solid-state & CAN and variable channel system

  • FREEWheel 10-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 
  • Full solid-state low-side switching via pushbuttons of six 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  • Two low-side solid-state switching channels for left and right hand paddle switches with a choice of paddle levers.
  • Unique to FREEWheel, includes two analogue channels for wireless 0-5V control such as multimap boost switching and traction slip control.
  • Another world first - includes CAN output for seamless PDM integration across all channels.
  • All our channel modes including indicator and hazard control, IVA fog light, dual rainlight and Flash-to-Pass plus momentary and latching behaviours.
  • Re-configurable using the included FREEWheel USB programming software and incorporating an IP67-rated USB port with rubber cap.
  • What's in the box?  Easyfit Transmitter and 2 paddle switches assembled to a button plate with 6 soldered pushbuttons and 2 soldered MIL-spec calibration switches all fitted with bespoke nut covers; battery; decal sheets; Receiver; USB cable; FREEWheel sticker; installation instructions.
  • The FREEWheel Race Receiver measures 86 x 55 x 35mm and weighs 285g and that includes our matching, custom loom and connector.
  • At just 176 x 154 x 19-29mm, the fully assembled FREEWheel Transmitter complete with paddle switches (width 275mm) weighs just 415g including the battery!

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.

FREEWheel wireless steering wheel button control system.  For pushbuttons and paddleshifters.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
Paddle plate.pdf
FREEWheel RACE installation instructions.pdf
8 hole button plate X62.pdf
Kit Car Electronics paddle shifter datasheet.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel 10-Channel GTX62 RACE Easyfit System

  • Product Code: FW10_GTX_Ez_L
  • Availability: 7
  • £1,335.60

  • Ex Tax: £1,113.00

Available Options


Related Products

Paddleshift Switches and Paddles

Paddleshift Switches and Paddles

IP67 rated, adjustable paddle switches with paddles and optional mounting kit bundle.  Availabl..

£370.80 Ex Tax: £309.00

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

SOLID-STATE RACE system plus two analogue 0-5V channels and optional CAN output.  Includes AMPS..

£950.40 Ex Tax: £792.00

FREEWheel 10-Channel GTC62 RACE Easyfit System

FREEWheel 10-Channel GTC62 RACE Easyfit System

SOLID-STATE with CANbus RACE system with two analogue 0-5V channels.  Includes AMPSEAL connecto..

£1,309.20 Ex Tax: £1,091.00

FREEWheel 8-Channel GTB6 RELAY Easyfit System

FREEWheel 8-Channel GTB6 RELAY Easyfit System

AMPSEAL connector, matching loom, internal relays rated to 15A and integrated BeamSTOP hardware requ..

£1,072.80 Ex Tax: £894.00

Tags: FREEWheel, solid state, 10-channel, wireless controls, Easyfit, paddleshifters, paddles, CAN