• Your shopping cart is empty!

SOLID-STATE with CANbus RACE system with eight switching and two analogue 0-5V channels. Includes AMPSEAL connector, matching loom and Easyfit Transmitter and option to specify carbon fibre button plate. 

Fully assembled* with six solid state-switched pushbuttons, two of our MIL-spec calibration switches with black anodised knobs and two paddleshift switches with a choice of carbon fibre levers. Uses the low-rise button plate C62, perfect for smaller wheels and digidash users and ready to bolt onto your steering wheel boss. 

A revolution in wireless steering wheel controls, for kit cars and race cars.

Main Features

  • solid-state switched gear shift control
  • 2 Mil-spec 0-5V rotary switches
  • 6 solid-state switched buttons
  • CAN signalling

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
8 hole button plate C62.pdf
Paddle plate.pdf
RACE AMPSEAL 23-pin connector pinout diagram.pdf
FREEWheel RACE installation instructions.pdf
Kit Car Electronics paddle shifter datasheet.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf

Included

  • Easyfit Transmitter, 2 paddle switches, 6 pushbuttons, 2 MIL-spec calibration switches with black knobs fitted to the C62 plate
  • 2 carbon fibre levers & hardware
  • 2 sets of magnets to adjust the pull feel
  • Transmitter battery
  • Motorsport pushbutton decal sheet
  • Rotary decal sheet
  • 10-channel solid-state switching CAN-enabled Receiver
  • 120Ohm CAN termination resistor (fitted or loose)
  • USB cable
  • Installation instructions

Optional

  • 23-pin 0.7m loom or 23 pins & housing
  • Carbon fibre button plate in lieu of acrylic button plate


Hardware Features

  • Full solid-state low-side switching via pushbuttons of  6 concurrent 600mA resistive or inductive loads, such as standard automotive relays, with built-in short circuit and overcurrent protection
  • 2 low-side solid-state switching channels for left and right hand paddle switches
  • 2 IP67 rated paddle switches with potted contacts
  • 2 sets of magnets to adjust the pull feel
  • Choice of carbon fibre paddle levers
  • Carbon fibre paddle mount
  • Option to upgrade to carbon fibre button plate
  • 2 analogue output channels for wireless 0-5V control such as multimap boost switching and traction slip control
  • CAN output for seamless PDM integration across all channels
  • Range of driving and racing output channel modes
  • Re-configurable using the included FREEWheel USB programming software
  • AMPSEAL connector(s)
  • IP67-rated USB port with rubber cap
  • Flame-retardant ABS plastic
  • Fully conformal coated for environmental protection
  • Battery life over 5 years
  • Unique Transmitter ID prevents cross-talk and interference
  • Wiring loom 20AWG
  • Option to upgrade to carbon fibre button plate

Driving Features

  • Momentary
  • Latching
  • BlinkSTOP indicator cancelling
  • BeamSTOP main beam toggle & flash
  • Flash-to-Pass
  • IVA fog light behaviour
  • Hazards
  • Wiper Latch & Intermittent
  • Flash
  • Rainlight behaviour

Size & Weight

  • Easyfit Transmitter: bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels
  • Easyfit Transmitter: 176 x 154 x 19-29mm, 415g including battery and paddle switches (width 275mm)
  • Solid-state Receiver: 86 x 55 x 35mm, 285g including loom


Plate Design

After you place your order, we will contact you and guide you through the plate design process.

We will confirm the buttonswitch colours, any decals you would like applying and how you would like the system pre-configured.

You will receive a photo of your loose-assembled plate for approval or changes and once you are completely happy with the design, we will put it into the queue for final assembly and test.


Availability & Leadtimes

We hold all our components in stock as sub-assemblies and this allows us to build quickly to your exact specification. We ask that you allow 3 working days for loose assembly of your plate and 7-10 working days for final assembly and despatch. 


Shipping

See our Delivery Information here https://blinkstop.co.uk/shop/delivery  


Warranty & Returns

See our Returns policy here https://blinkstop.co.uk/shop/returns

and our Guarantee policy here https://blinkstop.co.uk/shop/guarantee


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel 10-Channel GTC62 RACE Easyfit System

  • Product Code: FW10_GTC_Ez_L
  • Availability: 15

  • £1,309.20

  • Ex Tax: £1,091.00

Available Options


1 reviews / Write a review

Related Products

Paddleshift Switches and Paddles

Paddleshift Switches and Paddles

IP67 rated, adjustable paddle switches with paddles and optional mounting kit bundle.  Availabl..

£370.80 Ex Tax: £309.00

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

SOLID-STATE RACE system with eight switching and two analogue 0-5V channels. Includes AMPSEAL connec..

£950.40 Ex Tax: £792.00

FREEWheel 8-Channel GT RELAY Easyfit System

FREEWheel 8-Channel GT RELAY Easyfit System

RELAY system with eight 15A switching channels. Includes AMPSEAL connector, matching loom and Easyfi..

£1,072.80 Ex Tax: £894.00

FREEWheel 10-Channel GTX62 RACE Easyfit System

FREEWheel 10-Channel GTX62 RACE Easyfit System

SOLID-STATE with CANbus RACE system with eight switching and two analogue 0-5V channels. Includes AM..

£1,335.60 Ex Tax: £1,113.00

Tags: FREEWheel, solid state, 10-channel, wireless controls, Easyfit, paddleshifters, paddles, CAN