• Your shopping cart is empty!

RELAY system with eight 15A switching channels. Includes AMPSEAL connector, matching loom and Easyfit Transmitter and option to specify carbon fibre button plate. 

Fully assembled* with six relay-switched pushbuttons and two paddleshift switches with a choice of carbon fibre levers and plates and ready to bolt onto your steering wheel boss. 

A revolution in wireless steering wheel controls, for kit cars and race cars.

Main Features

  • relay-switched gear shift control
  • 6 relay-switched buttons
  • integrated BeamSTOP hardware requiring no external relays
  • option to add CAN signalling

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
Paddle plate.pdf
8-channel AMPSEAL 23-pin connector pinout diagram.pdf
FREEWheel-8 installation instructions (15A capability).pdf
FREEWheel Easyfit Transmitter installation instructions.pdf
Kit Car Electronics paddle shifter datasheet.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf
6 hole button plate B6.pdf
6 hole button plate X6.pdf

Included

  • Easyfit Transmitter, 2 paddle switches, 6 pushbuttons fitted to the chosen plate
  • 2 carbon fibre levers & hardware
  • 2 sets of magnets to adjust the pull feel
  • Transmitter battery
  • Motorsport pushbutton decal sheet
  • 8-channel relay-switching Receiver
  • USB cable
  • Installation instructions

Optional

  • 23-pin 0.7m loom or 23 pins & housing
  • Carbon fibre button plate in lieu of acrylic button plate
  • CAN-enabled Receiver upgrade
  • 120Ohm CAN termination resistor (fitted or loose)


Hardware Features

  • 8 Internal relays rated to 15A at 12V which can be used for high or low-side switching of loads
  • Control via 6 pushbuttons and left and right hand paddle switches
  • 2 IP67 rated paddle switches with potted contacts
  • 2 sets of magnets to adjust the pull feel
  • Choice of carbon fibre paddle levers
  • Carbon fibre paddle mount
  • Option for CAN output for seamless PDM integration and dash integration
  • Range of driving and racing output channel modes
  • Re-configurable using the included FREEWheel USB programming software
  • AMPSEAL connector(s)
  • IP67-rated USB port with rubber cap
  • Flame-retardant ABS plastic
  • Fully conformal coated for environmental protection
  • Battery life over 5 years
  • Unique Transmitter ID prevents cross-talk and interference
  • Wiring loom 18AWG

Driving Features

  • Momentary
  • Latching
  • BlinkSTOP indicator cancelling
  • BeamSTOP main beam toggle & flash
  • Flash-to-Pass
  • IVA fog light behaviour
  • Hazards
  • Wiper Latch & Intermittent
  • Flash
  • Rainlight behaviour

Size & Weight

  • Easyfit Transmitter: bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels
  • Easyfit Transmitter: 176 x 154 x 19-29mm, 415g including battery and paddle switches (width 275mm)
  • Relay Receiver:121 x 66 x 40mm, 385g including loom


Plate Design

After you place your order, we will contact you and guide you through the plate design process.

We will confirm the buttonswitch colours, any decals you would like applying and how you would like the system pre-configured.

You will receive a photo of your loose-assembled plate for approval or changes and once you are completely happy with the design, we will put it into the queue for final assembly and test.


Availability & Leadtimes

We hold all our components in stock as sub-assemblies and this allows us to build quickly to your exact specification. We ask that you allow 3 working days for loose assembly of your plate and 7-10 working days for final assembly and despatch. 


Shipping

See our Delivery Information here https://blinkstop.co.uk/shop/delivery  


Warranty & Returns

See our Returns policy here https://blinkstop.co.uk/shop/returns

and our Guarantee policy here https://blinkstop.co.uk/shop/guarantee


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel 8-Channel GT RELAY Easyfit System

  • Product Code: FW08_GT6_Ez_L
  • Availability: 7

  • £1,072.80

  • Ex Tax: £894.00

Available Options


0 reviews / Write a review

Related Products

Paddleshift Switches and Paddles

Paddleshift Switches and Paddles

IP67 rated, adjustable paddle switches with paddles and optional mounting kit bundle.  Availabl..

£370.80 Ex Tax: £309.00

FREEWheel 8-Channel RELAY Easyfit System

FREEWheel 8-Channel RELAY Easyfit System

RELAY system with eight 15A switching channels. Includes AMPSEAL connector, matching loom and Easyfi..

£714.00 Ex Tax: £595.00

FREEWheel GT2 Wireless Paddle 2-Channel RELAY System

FREEWheel GT2 Wireless Paddle 2-Channel RELAY System

RELAY system with two 15A switching channels. Includes AMPSEAL connector, matching loom, pigtailed T..

£753.60 Ex Tax: £628.00

FREEWheel 10-Channel GTX62 RACE Easyfit System

FREEWheel 10-Channel GTX62 RACE Easyfit System

SOLID-STATE with CANbus RACE system with eight switching and two analogue 0-5V channels. Includes AM..

£1,335.60 Ex Tax: £1,113.00

FREEWheel 10-Channel GTC62 RACE Easyfit System

FREEWheel 10-Channel GTC62 RACE Easyfit System

SOLID-STATE with CANbus RACE system with eight switching and two analogue 0-5V channels. Includes AM..

£1,309.20 Ex Tax: £1,091.00

FREEWheel GT2 Wireless Paddle 2-Channel CAN-ONLY System

FREEWheel GT2 Wireless Paddle 2-Channel CAN-ONLY System

CANBus RACE system with two  digital channels. Includes AMPSEAL connector, matching loom, pigta..

£837.60 Ex Tax: £698.00

Tags: FREEWheel, relay, 8-channel, wireless controls, Easyfit, paddleshifters, paddles