SOLID-STATE RACE system with AMPSEAL connector, matching loom and Easyfit Transmitter with option to spec carbon fibre button plate, ready to bolt onto your steering wheel boss. 

Fully assembled to our button plate with soldered switches*, a choice of plates and the option of two of our MIL-spec cal switches with our bespoke red anodised rotary knobs on the larger X62 plate. 

Simple to install, the FREEWheel Receiver connects to your existing circuits and is ideally located in an unobtrusive place under your dashboard.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Features of the FREEWheel RACE solid-state 8-channel system and USB configuration software

  • FREEWheel 8-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 
  • Full solid-state low-side switching of up to eight, 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  • Option to swap two channels for two variable outputs, for wireless rotary control such as multimap boost switching and traction slip control.
  • Another world first - optional CAN output for seamless PDM integration across all channels.
  • Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  • Endless re-configuration possibilities, using the included FREEWheel USB programming software and incorporating an IP67-rated USB port with rubber cap.
  • Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid-state channel.
  • What's in the box?  Easyfit Transmitter assembled to button plate with 8 soldered pushbuttons fitted with bespoke nut covers, battery, our custom top quality decal sheet, 8-channel Receiver, USB cable, FREEWheel sticker, installation instructions.
  • The FREEWheel Race Receiver measures 86 x 55 x 35mm and weighs 285g and that includes our matching, custom loom and connector.
  • At just 176 x 154 x 19-29mm, the fully assembled FREEWheel Transmitter and button plate weigh just 220g including the battery!

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.

FREEWheel wireless steering wheel button control system.  For pushbuttons and paddleshifters.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
8 hole button plate B.pdf
8 hole button plate C62.pdf
FREEWheel RACE installation instructions.pdf
8 hole button plate X62.pdf
8 hole button plate X8.pdf
8 hole button plate C8.pdf
KCE_WirelessCAN_Kvaser_dbc.zip
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
FREEWheel USB config tool Windows driver.zip
FREEWheel CAN configuration instructions.pdf

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel 8-Channel RACE SOLID-STATE Easyfit System

  • Product Code: FW08_SS_Ez_L
  • Availability: 8
  • £658.80

  • Ex Tax: £549.00

Available Options


Related Products

FREEWheel 8-Channel RELAY Easyfit System

FREEWheel 8-Channel RELAY Easyfit System

AMPSEAL connector, matching loom, internal relays rated to 15A and integrated BeamSTOP hardware requ..

£714.00 Ex Tax: £595.00

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

FREEWheel 10-Channel RACE SOLID-STATE Easyfit System

SOLID-STATE RACE system plus two analogue 0-5V channels and optional CAN output.  Includes AMPS..

£950.40 Ex Tax: £792.00

FREEWheel 8-Channel CAN-ONLY Easyfit System

FREEWheel 8-Channel CAN-ONLY Easyfit System

CANBus RACE system with AMPSEAL connector, matching loom and Easyfit Transmitter with option to spec..

£714.00 Ex Tax: £595.00

Tags: FREEWheel, solid-state, 8-channel, wireless controls, Easyfit