RACE system with AMPSEAL gold pin connector, matching loom and Easyfit Transmitter, ready to bolt onto your steering wheel boss. 

Fully assembled to our button plate with soldered switches*.  Simple to install, the FREEWheel Receiver connects to your existing circuits and is ideally located in an unobtrusive place under your dashboard.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Features of the FREEWheel RACE solid-state and variable channel system

  • FREEWheel 10-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 
  • Full solid-state low-side switching of up to eight, 600mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  • Unique to FREEWheel, includes two analogue channels for wireless potentiometer control such as multimap boost switching and traction slip control.
  • Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  • Endless re-configuration possibilities, using the included FREEWheel USB programming software and incorporating an IP67-rated USB port with rubber cap.
  • Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
  • What's in the box?  Easyfit Transmitter assembled to button plate with 8 soldered pushbuttons and 2 soldered variable potentiometers all fitted with bespoke nut covers, battery, decal sheet, Receiver, USB cable, FREEWheel sticker, installation instructions.
  • The FREEWheel Race Receiver measures 86 x 55 x 35mm and weighs 285g and that includes our matching, custom loom and gold pin connector.
  • At just 176 x 154 x 19-29mm, the fully assembled FREEWheel Transmitter and button plate weigh just 240g including the battery!

After you place your order, we will contact you to confirm your pushbutton colour choice and layout.

FREEWheel wireless steering wheel button control system.  For pushbuttons and paddleshifters.


*steering wheel not included and is shown for illustration purposes only.

FREEWheel USB configuration software.zip
10 channel button plate D.pdf
10-channel AMPSEAL 23-pin connector pinout diagram.pdf
FREEWheel RACE installation instructions (with connector).pdf
FREEWheel Easyfit Transmitter installation instructions.pdf

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel RACE 10-Channel Easyfit System with AMPSEAL gold pin connector

  • Product Code: FreeW10Ez_AMP
  • Availability: 15
  • £695.00

  • Ex Tax: £579.17

Available Options


Related Products

Paddleshift Switches and Paddles

Paddleshift Switches and Paddles

IP67 rated, adjustable paddle switches with paddles and optional mounting kit bundle.  Availabl..

£345.00 Ex Tax: £287.50

FREEWheel 8-Channel Easyfit System with AMPSEAL gold pin connector

FREEWheel 8-Channel Easyfit System with AMPSEAL gold pin connector

AMPSEAL gold pin connector, matching loom, internal relays rated to 15A and integrated BeamSTOP hard..

£525.00 Ex Tax: £437.50

23-PIN FREEWheel-10 Loom Housing and Pins

23-PIN FREEWheel-10 Loom Housing and Pins

AMPSEAL connector and gold pins for adding to your own loom, to connect to your 10-channel FREEWheel..

£30.00 Ex Tax: £25.00

FREEWheel RACE 10-Channel Kit with AMPSEAL gold pin connector

FREEWheel RACE 10-Channel Kit with AMPSEAL gold pin connector

RACE system with AMPSEAL gold pin connector and matching loom, for ultimate performance with minimal..

£510.00 Ex Tax: £425.00

Tags: FREEWheel, solid state, 10-channel, wireless controls, Easyfit