CANBus RACE system kit with eight digital and two variable channels. Includes AMPSEAL connector, matching loom and pigtailed Transmitter, for wireless control of your CAN-enabled PDMs and accessories.

The FREEWheel CAN Receiver is easily configured using our USB tool to match your CAN 2.0 device communication protocol and simply connects to your CAN network for wireless control of your CAN-enabled PDMs and accessories.

Mount the Transmitter to the rear of your steering wheel button plate* or wherever you want fingertip wireless control, and wire to your switches and paddles.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Main Features

2 variable (0-11 CAN) outputs
8 digital outputs
CAN signalling

FREEWheel USB configuration software.zip
KCE_WirelessCAN_Kvaser_dbc.zip
FREEWheel CAN installation instructions.pdf
KCE_WirelessCAN_ECUMaster.zip
KCE_WirelessCAN_AIM_xc1.zip
CAN AMPSEAL 8-pin connector pinout diagram.pdf
FREEWheel USB config tool Windows driver.zip

Included

Pigtailed Transmitter
Transmitter battery
CAN signalling Receiver
120Ohm CAN termination resistor (fitted or loose)
USB cable
Installation instructions

Optional

8-pin 0.7m loom or 8 pins & housing

Hardware Features

CAN output to your CANbus from 8 digital outputs
CAN signalling of 2 variable outputs (0-11 CAN) for wireless rotary control such as multimap boost switching and traction slip control
Compatible with all major CAN systems
Ultimate performance from a 10ms / 100Hz broadcast rate
Ultimate compatibility from 7 simultaneous CAN message formats (LSB, MSB and bitmasking) with free selection of base address, bus speed and identifier length
Use as momentary switches with logic handled by your PDM, or use our intuitive configuration tool to quickly convert to latching or one of our range of driving and racing output channel modes
Re-configurable using the included FREEWheel USB programming software
AMPSEAL connector(s)
IP67-rated USB port with rubber cap
Flame-retardant ABS plastic
Fully conformal coated for environmental protection
Battery life over 5 years
Unique Transmitter ID prevents cross-talk and interference
Wiring loom 20AWG

Driving Features

Momentary
Latching
BlinkSTOP indicator cancelling
BeamSTOP main beam toggle & flash
Flash-to-Pass
IVA fog light behaviour
Hazards
Wiper Latch & Intermittent
Flash
Rainlight behaviour

Size & Weight

Pigtailed Transmitter: 176 x 154 x 19-29mm, 61g including battery
CAN Receiver: 86 x 55 x 35mm, 112g including loom

Availability & Leadtimes

We hold all our components in stock as sub-assemblies and this allows us to build quickly to your exact specification. We ask that you allow 3-5 working days for final assembly and despatch.

Shipping

See our Delivery Information here https://blinkstop.co.uk/shop/delivery

Warranty & Returns

See our Returns policy here https://blinkstop.co.uk/shop/returns

and our Guarantee policy here https://blinkstop.co.uk/shop/guarantee