FREEWheel system with Easyfit Transmitter.  Available in kit form or fully assembled to our button plate with soldered switches - ready to bolt onto your steering wheel boss*. 

Simple to install, the FREEWheel Receiver connects to your existing relays and is ideally located in an unobtrusive place under your dashboard.

A revolution in wireless steering wheel controls, for kit cars and race cars.

Features of the FREEWheel RACE solid-state and variable channel system

  • FREEWheel 10-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 
  • Full solid-state low-side switching of up to eight, 500mA loads, such as standard automotive relays, with built-in short circuit and overcurrent protection.
  • Unique to FREEWheel, includes two analogue channels for wireless potentiometer control such as multimap boost switching and traction slip control.
  • Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  • Endless re-configuration possibilities, using the included FREEWheel USB programming software and incorporating an IP67-rated USB port with rubber cap.
  • Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
  • What's in the box?  FREEWheel 10-channel transmitter and receiver, battery, USB cable, mounting pad, FREEWheel sticker and installation instructions.  
  • The FREEWheel Race Receiver measures 86 x 55 x 35mm and weighs 208g, which includes a 0.7metre pre-wired loom with high temperature thin-wall wires.
  • Add the button plate bundle and factory assembly options to purchase the Easyfit Transmitter fully-assembled to our acrylic button plate, with eight pushbuttons and two rotary switches pre-soldered and fitted with nut covers - ready to bolt straight onto your steering wheel hub.
  • At just 176 x 154 x 19-29mm, the fully assembled FREEWheel Transmitter and button plate weigh just 240g including the battery!

FREEWheel wireless steering wheel button control system.  For pushbuttons and paddleshifters.


*steering wheel, button plate and switches not included and are shown for illustration purposes only.

*FREEWheel RACE Solid-State Receiver cannot be used with multiple Transmitters at the same time.

FREEWheel USB configuration software.zip
FREEWheel RACE installation instructions.pdf
10 channel easyfit backplate.pdf

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FREEWheel RACE 10-Channel Easyfit System

  • Product Code: FreeW10E_POT
  • Availability: 2
  • £454.00


Available Options


Related Products

FREEWheel RACE 10-Channel System

FREEWheel RACE 10-Channel System

Simple to install, the FREEWheel Receiver connects to your existing relays and is ideally located in..

£429.00

FREEWheel 8-Channel Easyfit System

FREEWheel 8-Channel Easyfit System

FREEWheel system with Easyfit Transmitter.  Available in kit form or fully assembled to our but..

£320.00

Additional FREEWheel Easyfit Transmitter

Additional FREEWheel Easyfit Transmitter

Add a second FREEWheel Transmitter for the ultimate in wireless flexibility.  Thanks to our uni..

£90.00

Acrylic Paddle Plate and Disk

Acrylic Paddle Plate and Disk

Bundle contains a custom shaped, acrylic, 5mm thick paddle plate and 3mm or 5mm spacer disk.Paddle p..

£20.00

Tags: FREEWheel, wireless, steering wheel, electronic, button, button plate, pushbutton, paddle, paddleshift, control, smart, system, aftermarket, kit car, race car, acrylic, backplate, stickers, decal, motorsport, potentiometer, variable, boost, traction, slip.